AI-generated image
Summary: An Indian company bought its global parent. Orders now arrive from industries well beyond its old chemical base. Yet little of that growth reaches shareholders. What is soaking it up, and what has to change before it does?
Think of the large vessels used in chemical factories, where different chemicals are mixed, heated and processed. Many of these chemicals are highly corrosive. An ordinary steel vessel can gradually get damaged by them. This is where GMM Pfaudler comes in. It makes steel vessels coated on the inside with glass, protecting them from corrosion while retaining the strength of steel.
A specialist that leaned on one market
GMM’s expertise also extends to other corrosion-resistant equipment, such as fluoropolymer-lined systems, along with mixers, filters, dryers, seals and complete process systems. It does not make the chemicals or medicines itself. It supplies the equipment that factories use to manufacture them.
For years, the company was closely associated with glass-lined equipment, serving mainly the chemical and pharmaceutical industries. But that dependence has become a weakness. Demand for such equipment depends on customers setting up new factories or expanding existing ones.
That is broadly what happened in FY25. A global slowdown in the chemical industry, particularly in agrochemicals, hurt GMM’s glass-lined business. Consolidated revenue fell 7 per cent, while profit after tax dropped 71 per cent.
GMM has since been trying to change that dependence. It is widening its product range, entering new industries and reorganising its global operations.
Beyond the glass-lined tank
The first part of this change is happening in the products GMM sells. The company now operates through four global divisions:
- Corrosion Resistant Technologies (CRT): the traditional glass-lined business, along with fluoropolymer products used in industries such as semiconductors.
- Process Performance Technologies (PPT): mixers, filters, dryers and seals for industries ranging from pharmaceuticals and chemicals to mining and water treatment.
- Heavy Engineering Technologies (HET): large, customised equipment made in India for nuclear power, thermal power, oil and gas and petrochemical projects.
- Process Systems Technologies (PST): complete process systems, instead of individual pieces of equipment.
The changing product mix is beginning to show up in the order book.
|
|
FY25 | FY26 | H1 FY27 |
|---|---|---|---|
| Total order intake (Rs crore) | 3,102 | 3,714 | 2,204 |
| Non-traditional industries | 33% | 42% | 44% |
| Traditional industries | 67% | 58% | 56% |
This matters because different industries invest at different times. A slowdown in chemical manufacturing need not coincide with a slowdown in defence, nuclear power or semiconductor investments. A wider customer base can therefore make GMM less dependent on the capital expenditure cycle of any one industry.
The order intake of its four divisions also shows where the momentum is coming from.
| Division | H1 FY27 order intake (Rs crore) | Growth (%) |
|---|---|---|
| CRT | 1,058 | 19 |
| PPT | 731 | 74 |
| HET | 258 | 306 |
| PST | 157 | -69 |
CRT remains the largest contributor, but PPT and HET are growing faster. The fall in PST’s order intake needs context: H1 FY26 included a large order worth Rs 355 crore.
PPT’s mixing and separation technologies can be used in several industries, not just chemicals and pharmaceuticals. HET is benefiting from demand in power, nuclear and oil and gas projects, and management says its plant is booked out until Q2 FY28.
Within CRT sits Edlon, GMM’s high-margin fluoropolymer business in the US. It supplies high-purity tanks and linings that semiconductor factories use to handle chemicals without contaminating them, and works with Intel and Micron. Edlon won an order worth USD 8 million and added capacity in the US. Its turnover has stayed flat at about Rs 196 crore from FY24 to FY26.
A costly global structure is weighing on profits
GMM’s second challenge comes from its international business. In 2021, it acquired a majority stake in the global Pfaudler business, and later took full control. This turned it into a much larger group with operations across several countries. It gave GMM access to global customers, established brands and new technologies. But it also brought a complex overseas structure, with different cost bases, subsidiaries and inter-company loans.
Europe has been the biggest operating challenge. The region’s chemical industry is going through a structural reset. Several companies have shut plants or cut investment in new capacity, hurting demand for equipment. At the same time, GMM’s European operations continue to carry relatively high employee and operating costs.
The impact is visible in the numbers. GMM’s loss-making European entities reported a EBITDA loss of about Rs 43 crore in H1 FY27. This pulled down the group’s reported EBITDA margin.
| H1 FY27 | EBITDA (Rs crore) | EBITDA margin (%) |
|---|---|---|
| Reported consolidated business | 204 | 10.2 |
| Excluding loss-making European entities | 247 | 15.2 |
There are also financial complications. A large loan between two overseas subsidiaries, in Germany and Luxembourg, is in a different currency from one of them, which has led to foreign-exchange fluctuations and notional losses. The group’s tax structure has added to the burden, with its effective tax rate at about 49 per cent in FY26.
Restructuring the business and its finances
GMM is now trying to address both problems. On the operating side, it has closed its UK manufacturing facility and reduced its workforce in Germany. It is also shifting selected manufacturing activities to Poland, while using India as another lower-cost manufacturing base.
The idea is to manufacture more in lower-cost locations such as Poland and India, while retaining customer relationships, technology and service capabilities in Europe. This should help reduce manufacturing costs and improve capacity utilisation. The company expects the benefits to become more visible from FY28.
GMM is also simplifying the group’s financial structure. It is working on refinancing, ending inter-company loans and streamlining its overseas legal entities. The aim is to lower finance costs, limit currency-related volatility and make the tax structure more efficient.
What to watch
GMM’s growth is not yet showing up in its profits. Only a small share of its operating profit reaches shareholders, after interest, tax and restructuring costs.
The first test is whether this gap narrows. GMM has started repaying debt and plans to refinance it over the next 12-18 months. The second is Europe. GMM has already shut underused factories in the UK and Hyderabad and cut jobs in Germany. Watch whether its loss-making European subsidiaries now reach break-even.







